Measuring Earthquakes Made SIMPLE: 3 Essential Scales

Measuring earthquakes involves recording the seismic waves released when rocks suddenly move along a fault, then using scales to describe either the size of the earthquake (its magnitude) or the strength of shaking and damage at a particular place (its intensity). This guide explains how each one works, how they differ and how to use them accurately in the exam.

Comparison diagram of the three scales used for measuring earthquakes: Richter, moment magnitude and Modified Mercalli
The three essential scales for measuring earthquakes and what each one measures.

What does measuring earthquakes involve?

An earthquake is a sudden, violent shaking of the ground caused by the release of built-up pressure as rocks move along a fault. Most earthquakes occur at plate boundaries, where tectonic plates collide, pull apart or slide past each other.

The point underground where the rock breaks is called the focus (or hypocentre). The point on the Earth’s surface directly above it is the epicentre. Energy spreads out from the focus as seismic waves, and these waves are what instruments detect.

Measuring earthquakes therefore answers two different questions:

  • Magnitude: how much energy did the earthquake release? There is one magnitude value for each earthquake.
  • Intensity: how strongly was the ground shaken, and how much damage was caused, at a particular location? Intensity varies from place to place.

Understanding this difference is one of the most important ideas in this part of Topic 3 (Hazardous environments).

Tools for measuring earthquakes: the seismometer

A seismometer is the instrument used to detect ground movement, and it is the starting point for measuring earthquakes. The record it produces is called a seismogram, and the whole system is often called a seismograph.

Traditional seismometers used a heavy weight suspended above a rotating drum, with a pen tracing a line as the ground shook. Modern seismometers are electronic and send data instantly to computers.

The three main types of seismic wave

WaveDescriptionSpeed and effects
P waves (primary)Compression waves that push and pull rock in the direction of travelFastest; arrive first; travel through solids and liquids
S waves (secondary)Shear waves that move rock up and down or side to sideSlower; arrive second; travel only through solids
Surface wavesWaves that travel along the Earth’s surfaceSlowest; arrive last; usually cause the most damage

By comparing the arrival times of P and S waves at three or more seismometers, scientists can calculate the location of the epicentre. Networks of seismometers run by organisations such as the United States Geological Survey (USGS) and the British Geological Survey record earthquakes around the world every day.

Scale 1: the Richter scale

The Richter scale was developed by the seismologist Charles Richter in 1935. It measures the magnitude of an earthquake from the amplitude (height) of the largest seismic waves recorded on a seismogram, adjusted for the distance from the epicentre. It was the first widely used method of measuring earthquakes by size.

A logarithmic scale

The Richter scale is logarithmic. Each increase of one whole number represents a ten-fold increase in the amplitude of the seismic waves and roughly a 32-fold increase in the energy released. This means a magnitude 7 earthquake produces waves ten times larger than a magnitude 6 earthquake, and releases about 32 times more energy.

Limitations of the Richter scale

  • It was designed for earthquakes in California recorded on a particular type of seismometer.
  • It becomes inaccurate for very large earthquakes, roughly above magnitude 7, because it underestimates their size.
  • It does not describe damage or effects on people.

Because of these problems, scientists now rarely use the original Richter scale for large earthquakes, although the media still often refer to it.

Scale 2: the moment magnitude scale

The moment magnitude scale (Mw) is now the standard scale used by seismologists for measuring earthquakes, especially large ones. It was developed in the late 1970s to overcome the weaknesses of the Richter scale.

Instead of relying only on wave height, it calculates the total energy released using three factors:

  1. The area of the fault that ruptured.
  2. The distance the rock slipped along the fault.
  3. The rigidity (strength) of the rocks involved.

Like the Richter scale, the moment magnitude scale is logarithmic, and the numbers are similar for small and moderate earthquakes. It remains accurate for the very largest events. The largest earthquake ever recorded, in Chile in 1960, had a moment magnitude of 9.5.

When news reports today give the “magnitude” of a major earthquake, they are usually quoting the moment magnitude rather than the true Richter value.

Scale 3: the Modified Mercalli Intensity scale

The Modified Mercalli Intensity (MMI) scale measures the intensity of shaking at a particular place, based on what people feel and the damage that is observed. It uses Roman numerals from I to XII and offers a more human-centred approach to measuring earthquakes.

IntensityDescription
INot felt except by very few people
IIIFelt indoors; hanging objects swing
VFelt by nearly everyone; some dishes and windows broken
VIIDifficult to stand; considerable damage to poorly built structures
IXConsiderable damage even to well-designed buildings; some collapse
XIITotal destruction; objects thrown into the air

A single earthquake has one magnitude but many intensity values. Intensity is usually highest close to the epicentre and decreases with distance, but it is also affected by local geology, building quality and population density.

Why the Mercalli scale is useful

The Mercalli scale is particularly valuable for understanding impacts. It can be used for historic earthquakes that occurred before seismometers existed, using written descriptions of damage. It also helps planners identify which areas suffered the most severe shaking so that aid and rebuilding can be targeted.

Comparing the scales for measuring earthquakes

FeatureRichterMoment magnitudeModified Mercalli
MeasuresMagnitudeMagnitudeIntensity
Based onAmplitude of seismic wavesFault area, slip and rock rigidityObserved effects and damage
ValuesNumbers (logarithmic)Numbers (logarithmic)Roman numerals I to XII
One value per earthquake?YesYesNo, varies by location
Main strengthSimple and well knownAccurate for all sizesShows human impact
Main weaknessInaccurate for large earthquakesComplex to calculateSubjective; depends on observers

Using more than one approach to measuring earthquakes gives a fuller picture. Magnitude tells scientists how powerful the event was, while intensity shows how it affected people and places.

Why measuring earthquakes matters

Measuring earthquakes is not only of scientific interest. Accurate, rapid measurement helps to reduce the impact of future tectonic hazards.

  • Emergency response: rapid magnitude and location estimates help governments decide how much help is needed and where to send it.
  • Tsunami warnings: large, shallow earthquakes under the sea can trigger tsunamis, so warning centres use earthquake data to issue alerts.
  • Early warning systems: detecting fast P waves allows a warning to be sent seconds before the more damaging S and surface waves arrive.
  • Land use planning and building codes: maps of past intensity show which areas need stricter construction rules.
  • Long-term research: records of past earthquakes help identify areas of high risk, even though the exact timing of earthquakes cannot be predicted.

These actions fit into the hazard management cycle, particularly the stages of preparedness and mitigation.

Case study: measuring earthquakes in Japan (2011)

On 11 March 2011, a massive earthquake struck off the north-east coast of Japan, an area known as Tōhoku. Japan lies where several tectonic plates meet, which also explains the many volcanoes in Japan.

Magnitude

The earthquake occurred on a destructive plate boundary, where the Pacific Plate is subducting beneath the plate on which northern Japan sits. It had a moment magnitude of around 9.0–9.1, making it the most powerful earthquake ever recorded in Japan and one of the largest recorded anywhere in the world.

Intensity and impacts

Intensity varied greatly across Japan. Strong shaking was felt over a very large area, including Tokyo, but the most serious damage was caused by the tsunami that followed.

Waves several metres high, and much higher in some coastal valleys, swept inland, destroying towns and damaging the Fukushima Daiichi nuclear power plant. Around 18,000 people were killed or are still missing.

How measurement helped

Japan has one of the densest networks of seismometers in the world. Its earthquake early warning system detected the first P waves and sent alerts to phones, television and railways before the strongest shaking arrived, allowing high-speed trains to slow down. Tsunami warnings were issued within minutes, although the first estimates of the earthquake’s magnitude were too low, which shows the challenge of measuring earthquakes of this size quickly.

Comparison with Haiti (2010)

The Haiti earthquake of January 2010 had a magnitude of 7.0, far smaller than the Japan earthquake, yet it caused a much higher death toll, widely reported to be more than 100,000. Poor building quality, high population density close to the epicentre and limited emergency services all increased the intensity of the impacts. This comparison shows that magnitude alone does not determine how deadly an earthquake will be.

Measuring earthquakes: frequently asked questions

What is the difference between magnitude and intensity?

Magnitude measures the energy released by an earthquake and has one value for each event. Intensity measures the strength of shaking and damage at a particular place, so it varies from location to location.

Is the Richter scale still used?

The term is still widely used in the media, but seismologists now use the moment magnitude scale for medium and large earthquakes because it is more accurate.

What is a seismometer?

A seismometer is an instrument that detects and records ground movement caused by seismic waves. The record it produces is called a seismogram.

Why is the scale logarithmic?

Earthquakes vary hugely in size, so a logarithmic scale allows very small and very large events to be shown on a manageable range of numbers. Each whole number represents about 32 times more energy.

Can earthquakes be predicted?

No. Scientists can identify areas at high risk and estimate the probability of future earthquakes, but they cannot predict the exact time, place and size of a specific earthquake.

Which scale is best for measuring earthquakes?

It depends on the purpose. The moment magnitude scale is best for measuring the energy released, while the Mercalli scale is best for describing effects on people and buildings.

Measuring earthquakes: key takeaways

  • Measuring earthquakes involves recording seismic waves using seismometers.
  • Magnitude measures energy released; intensity measures shaking and damage at a location.
  • The Richter scale measures wave amplitude but is inaccurate for very large earthquakes.
  • The moment magnitude scale is now the standard scale and is based on fault area, slip and rock rigidity.
  • Both magnitude scales are logarithmic: each whole number is about 32 times more energy.
  • The Modified Mercalli scale uses Roman numerals I to XII based on observed effects.
  • The Japan 2011 earthquake had a magnitude of around 9.0–9.1, while Haiti 2010 was magnitude 7.0 but far deadlier.
  • Rapid measurement supports early warnings, tsunami alerts and emergency response.

To conclude

Measuring earthquakes requires both an understanding of the science of seismic waves and an appreciation of how shaking affects people. The Richter, moment magnitude and Modified Mercalli scales each answer a different question, and using them together gives the clearest picture of any earthquake.

Dr Hayley Stainton

About the author

Dr Hayley Stainton is an educator, examiner and the founder of The Geography Teacher. She has a PhD and more than 20 years’ experience teaching at school and university level. Read more about Hayley