Nuclear power is electricity generated from the heat released when atoms of uranium are split inside a reactor. It is part of Topic 4: In this guide I explain how nuclear power works in five steps, weigh up its advantages and disadvantages, and look at two contrasting examples: the Fukushima disaster in Japan and the nuclear-powered electricity system of France.

Table of Contents
What is nuclear power?
It uses a process called nuclear fission. When a neutron hits the nucleus of a uranium-235 atom, the nucleus splits into two smaller atoms. This releases a large amount of heat and two or three more neutrons. Those neutrons split more atoms, which creates a chain reaction.
The heat is used to boil water. The steam spins a turbine connected to a generator, just like in a coal or gas power station. The big difference is that no fuel is burned, so the station releases almost no carbon dioxide while it runs.
Uranium is a metal mined from the ground, and the amount available is limited. This is why geographers class nuclear power as a non-renewable energy source, even though it is low carbon. Around 9% of the world’s electricity comes from nuclear reactors.
Key terms you need to know
- Uranium: a radioactive metal used as nuclear fuel. Kazakhstan, Canada, Namibia and Australia are major producers.
- Nuclear fission: splitting the nucleus of an atom to release energy.
- Chain reaction: when neutrons from one fission split further atoms.
- Control rods: rods that absorb neutrons to slow or stop the chain reaction.
- Radioactive waste: used fuel and materials that give off harmful radiation, some for thousands of years.
- Decommissioning: safely closing and dismantling a nuclear power station at the end of its life.
- Base load: the minimum amount of electricity needed all the time, day and night.
How nuclear power works: 5 key steps
Most nuclear power stations in the world use a design called a pressurised water reactor. The diagram above shows the main parts. Follow the steps below in order.
1. Mining and processing uranium
Uranium ore is dug from open pits or underground mines, or dissolved out of the rock with chemicals. Natural uranium contains less than 1% uranium-235, so it is enriched to around 3 to 5% so that it can keep a chain reaction going. It is then made into small ceramic pellets and packed into long metal tubes called fuel rods. A single pellet, about the size of a fingertip, contains roughly as much energy as a tonne of coal.
2. Fission in the reactor core
Hundreds of fuel rods sit in the reactor core, surrounded by water. Neutrons split uranium atoms and the chain reaction produces intense heat. Control rods are raised or lowered between the fuel rods. Pushing them in absorbs neutrons and slows the reaction, and pulling them out speeds it up. In an emergency they drop in fully to shut the reactor down.
3. Turning heat into steam
Water flowing through the core heats to about 300°C. It is kept under very high pressure so it does not boil. This hot water passes through a steam generator, where it heats a separate supply of water and turns it to steam. Keeping the two water loops apart means radioactive water stays inside the thick steel and concrete containment building.
4. Spinning the turbine and generator
High-pressure steam is piped to a turbine and makes its blades spin very fast. The turbine shaft turns a generator, which converts the movement into electricity. Transformers increase the voltage and the electricity is sent along power lines to the national grid. A large reactor can produce over 1,000 megawatts, enough for well over a million homes.
5. Cooling and managing waste
After passing through the turbine, the steam is cooled in a condenser and turned back into water, which is pumped back to the steam generator. Cooling needs huge amounts of water, so these stations are usually built on coasts or large rivers. Used fuel rods are very radioactive. They are first stored in cooling ponds and later in sealed containers. Finland is building Onkalo, the world’s first deep underground store for this waste.
Advantages of nuclear power
- Low carbon: over its whole life cycle, a reactor produces about as little carbon dioxide per unit of electricity as wind power, and far less than coal or gas. This helps countries meet climate change agreements.
- Reliable base load: reactors run day and night in any weather, unlike solar and wind.
- Energy security: a small amount of fuel lasts a long time and can be stockpiled, which improves energy security.
- Small land area: one site produces as much electricity as hundreds of wind turbines.
- Jobs: stations employ thousands of skilled workers during construction and operation.
Disadvantages of nuclear power
- Radioactive waste: high-level waste stays dangerous for thousands of years, and most countries still have no permanent store.
- Risk of accidents: rare but serious accidents, such as Chernobyl in 1986 and Fukushima in 2011, can contaminate large areas.
- Very high cost: new stations cost tens of billions of pounds and often run late. Hinkley Point C in Somerset, UK, has risen to well over £30 billion.
- Long build times: a new station can take 10 to 15 years from planning to power.
- Security and weapons: nuclear materials must be guarded against theft and misuse.
- Decommissioning: closing old stations is slow and expensive.
Nuclear power pros and cons summary
| Factor | Advantage | Disadvantage |
|---|---|---|
| Environment | Very low carbon emissions; small land area | Radioactive waste; risk of contamination after accidents |
| Economy | Cheap to run once built; skilled jobs | Huge build and decommissioning costs |
| Reliability | Steady base load in all weather | Long shutdowns if safety faults are found |
| Society | Stable energy prices and supply | Public fear; few communities want waste stores |
Nuclear power case study: Fukushima, Japan (2011)
Background
Japan has few fossil fuels of its own, so after the oil crises of the 1970s it built many nuclear power stations. Before 2011 around a quarter to a third of its electricity came from nuclear reactors. Fukushima Daiichi, on the north-east coast of Honshu, had six reactors run by the company TEPCO.
Causes
On 11 March 2011 a magnitude 9.0 earthquake struck off the coast of Japan at a destructive plate boundary. The reactors shut down automatically, but the earthquake cut the outside power supply. Less than an hour later a tsunami about 15 metres high reached the plant. The sea wall was designed for a much smaller wave, so water flooded the backup diesel generators. Without power, the cooling pumps stopped. You can read more about the hazard side in my guide to tectonic hazards.
Impacts
- The cores of three reactors melted in the first few days, and hydrogen explosions damaged the reactor buildings.
- Radioactive material was released into the air and sea. The accident was rated level 7, the highest on the international scale, the same as Chernobyl.
- More than 100,000 people were evacuated from a zone around the plant. Some towns stayed closed for over a decade.
- No one died from radiation sickness, but over 2,000 deaths among evacuees, mostly elderly people, have been linked to the stress and disruption of evacuation.
- Farming and fishing suffered because people feared contaminated food.
Responses
Japan shut down all of its reactors for safety checks, and imported more gas and coal to fill the gap. New rules required higher sea walls and better backup power. Reactors began to restart from 2015. In August 2023 TEPCO started releasing treated water from the site into the Pacific Ocean, which caused protests from fishing communities and from China. Germany reacted by deciding to close all of its reactors, and the last three shut in April 2023. The World Nuclear Association estimates the clean-up will take 30 to 40 years.
Nuclear power case study: France
France shows the opposite story: a country that chose nuclear power as its main electricity source. After the 1973 oil crisis, the government launched the Messmer Plan to build dozens of reactors quickly so that France would depend less on imported oil.
Today France has 57 reactors, the largest fleet in Europe, run by the state-owned company EDF. According to the US Energy Information Administration, nuclear power produced nearly 65% of France’s electricity in 2024. As a result, France has one of the lowest-carbon electricity systems in Europe and is a large exporter of electricity to neighbours such as the UK, Italy and Germany.
There are problems too. Many reactors are 40 years old. In 2022, corrosion faults forced several to close for repairs, output fell sharply and France had to import electricity. The newest reactor, Flamanville 3 in Normandy, connected to the grid in December 2024, about 12 years late and several times over budget.
Comparing nuclear power in Japan and France
| Factor | Japan | France |
|---|---|---|
| Why nuclear was chosen | Few domestic fossil fuels | Few domestic fossil fuels; 1973 oil crisis |
| Natural hazard risk | Very high (earthquakes and tsunamis) | Low |
| Recent trend | Sharp fall after 2011, slow restarts | Still the main source; new reactors planned |
| Public opinion | Divided after Fukushima | Generally accepting |
A third example close to many readers is the Barakah nuclear power plant in Abu Dhabi. Its four reactors were fully running by 2024 and can supply about a quarter of the UAE’s electricity, helping a major oil producer cut its carbon emissions.
Investigating nuclear power through fieldwork
You could investigate attitudes towards a nuclear power station or a proposed waste store. Use a questionnaire with a bipolar scale to compare the views of people living at different distances from the site. You could also collect secondary data on electricity generation from government sources and draw a pie chart or divided bar graph showing how a country’s energy mix has changed.
Nuclear power: frequently asked questions
Is nuclear power renewable?
No. Uranium is a finite resource dug from the ground, so nuclear power is non-renewable. It is, however, a low-carbon source, which is why many countries see it as part of a path to net zero.
Is nuclear power safe?
Serious accidents are very rare, and per unit of electricity, nuclear power has caused far fewer deaths than coal, which harms health through air pollution. The risks are the long-lived waste and the scale of damage when an accident does happen.
Which country uses the most nuclear power?
The USA produces the most nuclear electricity in total. France gets the highest share of its electricity from nuclear power, at around 65 to 70% in most years.
Why are nuclear power stations built near the coast?
They need huge amounts of cooling water for their condensers. Coastal sites also allow heavy parts to be delivered by sea, and are often away from large towns.
Nuclear power: key takeaways
- Nuclear power uses heat from the fission of uranium-235 to make steam, which drives a turbine and generator.
- It is non-renewable but low carbon, and provides reliable base load electricity.
- The main drawbacks are radioactive waste, accident risk, high cost and long build times.
- Fukushima (2011) showed how a natural hazard can trigger a nuclear disaster.
- France gets around 65% of its electricity from 57 reactors and exports power to its neighbours.
To conclude
Nuclear power divides opinion more than almost any other energy source. It offers steady, low-carbon electricity, as France shows, but Fukushima proved that the consequences of failure can last decades. In the exam, weigh these points carefully and support your judgement with real figures.
