River Transportation Made SIMPLE: The 4 Essential Processes

River transportation is the movement of eroded material, known as the load, downstream by the flowing water of a river. The load ranges from huge boulders on the bed to minerals so finely dissolved that they cannot be seen. Rivers move this material using four processes: traction, saltation, suspension and solution.

Diagram of the four processes of river transportation: traction, saltation, suspension and solution
The four processes of river transportation, from boulders rolled along the bed to minerals carried in solution.

What is river transportation?

Erosion breaks material away from the bed and banks, transportation carries it, and deposition drops it when the river loses energy. The three processes are linked, so a change in one usually affects the other two.

The material a river carries is called its load. It comes from several sources: erosion of the channel, weathering and mass movement on valley sides, and soil washed in by surface runoff. Every particle, from a grain of clay to a large boulder, must be moved by one of the processes of river transportation.

The energy for river transportation comes from the flow of water downhill under gravity. A fast, deep river with high discharge has more energy and can move more and larger material. A slow, shallow river has less energy, so it can only carry fine particles and drops the rest.

The 4 processes of river transportation

Exam questions frequently ask students to name, describe or explain the four processes of river transportation. Each process is linked to a particular size of particle and a particular amount of energy. The table below gives a quick summary before each process is explained in turn.

ProcessType of loadHow it movesEnergy needed
TractionLarge boulders and cobblesRolled or dragged along the bedVery high (often only in floods)
SaltationPebbles, gravel and coarse sandBounced along the bed in a series of hopsHigh
SuspensionFine sand, silt and clayCarried within the body of the waterLow to moderate
SolutionDissolved mineralsCarried invisibly as part of the waterAlmost none

1. Traction

Traction is the rolling or dragging of large boulders and cobbles along the river bed. These particles are too heavy to be lifted off the bed, so the force of the water pushes them along. Traction needs a great deal of energy, which is why it is most common in the upper course and during floods.

For much of the year, large boulders in an upland channel may not move at all. When discharge rises after heavy rainfall or snowmelt, the river gains enough energy to roll them a short distance downstream. As boulders scrape along the bed they cause abrasion and attrition, so traction is closely linked to erosion.

2. Saltation

Saltation is the bouncing of smaller pebbles, gravel and coarse sand along the river bed. The flow lifts a particle briefly, carries it a short distance and then drops it back onto the bed, where it may knock other particles upwards. The word comes from the Latin saltare, meaning “to leap”, which is a useful way to remember it.

Saltation sits between traction and suspension. The particles are light enough to be lifted for a moment but too heavy to stay in the water for long. Together, material moved by traction and saltation is known as the bedload.

3. Suspension

Suspension is the carrying of fine particles of sand, silt and clay within the body of the water. Turbulence in the flow keeps these small particles lifted, so they rarely touch the bed. The suspended load gives many rivers their brown or cloudy colour, especially after heavy rain.

Suspension is usually the largest share of the total load in the middle and lower course. Once silt and clay are in suspension, they can be carried even at quite low velocities. This fine material is eventually deposited on floodplains during floods or at the river mouth.

4. Solution

Solution is the transport of minerals that have been dissolved in the water. Rocks such as limestone and chalk contain calcium carbonate, which dissolves in slightly acidic water through the process of corrosion (solution erosion). The dissolved load is invisible and is carried along as part of the water itself.

Solution needs almost no energy, so dissolved minerals can be carried even in very slow-moving water. Students should be careful not to confuse solution as a process of river transportation with corrosion, the process of erosion that dissolves the rock in the first place. The dissolved load usually remains in the water until it reaches the sea.

Types of river load

Geographers group the material a river carries into three types of load. Using these terms correctly in an answer shows strong subject knowledge and can lift a response into a higher mark band.

  • Bedload – large and medium particles moved along the bed by traction and saltation.
  • Suspended load – fine particles of sand, silt and clay carried within the water by suspension.
  • Dissolved load – minerals in solution, carried invisibly as part of the water.

Two further terms describe how much a river can transport. Competence is the largest particle size a river can carry at a given velocity. Capacity is the total amount of load a river can carry, which increases as discharge increases.

Factors affecting river transportation

The amount and size of material a river can move is not fixed. Several factors control river transportation, and they often change over time and along the course of a river.

Velocity and discharge

Velocity is the speed of the water, and discharge is the volume of water passing a point each second, measured in cumecs. Higher velocity gives a river more energy to lift and carry particles. During a flood, both velocity and discharge rise sharply, and a river may move more material in a few days than in the rest of the year.

Gradient

A steep gradient increases the pull of gravity on the water and can increase velocity. In the upper course, steep slopes help rivers move boulders during high flow. However, upland channels are also shallow and rocky, so much of the energy is lost to friction.

Channel shape and efficiency

A deep, smooth channel with a large cross-sectional area loses less energy to friction with the bed and banks. This makes it more efficient, so more energy is available for river transportation. Wide, shallow channels with rough, boulder-strewn beds are less efficient.

Geology and particle size

The rocks in a drainage basin affect what load is available. Soluble rocks such as limestone and chalk produce a large dissolved load, while hard igneous rocks may supply large, angular boulders. Clay soils produce fine material that is easily carried in suspension.

The Hjulström curve

The Hjulström curve is a graph that shows the velocity needed to erode, transport and deposit particles of different sizes. It shows that sand is the easiest particle to pick up, while clay and silt need higher velocities because they stick together. However, once clay is lifted it stays in suspension even at very low velocities.

How river transportation changes downstream

The long profile of a river shows how the channel changes from source to mouth. River transportation changes along this profile because discharge, channel shape and load size all change downstream.

CourseTypical loadMain transport processes
Upper courseLarge, angular bouldersTraction and saltation, mainly during floods
Middle courseSmaller, more rounded pebbles and sandSaltation and suspension
Lower courseFine silt and clay, plus dissolved mineralsSuspension and solution

As load moves downstream, attrition makes particles smaller and more rounded. At the same time, discharge increases as tributaries join and the channel becomes deeper and smoother. The result is a river that carries a greater total load in the lower course, but made up of much finer particles.

This explains why the lower course is dominated by suspension and solution, and why floodplains, levees and deltas are built from fine sediment. The upper course, by contrast, is littered with large boulders that only move by traction when hydraulic action and high flows provide enough energy.

River transportation connects erosion and deposition. The load carried by a river is also a tool for erosion: bedload causes abrasion of the bed and banks, and particles collide with each other through attrition. A river with a large bedload can therefore erode more effectively than clear water.

Deposition happens when a river no longer has enough energy to transport its load. This can occur when velocity falls on the inside of a bend, when a river floods onto its floodplain, or when it enters the sea or a lake. The largest particles are dropped first, and the finest are carried furthest.

Many landforms depend on this balance. Slip-off slopes form where the slower inside bend of a meander drops sediment, while levees and floodplains form from silt deposited during floods. Without river transportation, none of these depositional features could develop.

Case study: river transportation along the River Tees

The River Tees in north-east England is a widely used UK example of how river transportation changes from source to mouth. It rises on Cross Fell in the North Pennines and flows east to the North Sea at Teesside.

Upper course

In Upper Teesdale the channel is narrow, shallow and rocky, with large boulders on the bed. These boulders mostly move by traction during high flows, such as after heavy rain or snowmelt on the Pennine moors. The river crosses the hard Whin Sill at Cauldron Snout and High Force, one of England’s best-known waterfalls.

Water draining the peat moorland of the upper basin is often stained brown by dissolved organic matter. Where the river flows over Carboniferous limestone, it also carries dissolved calcium carbonate in solution. This shows that solution can be important even in upland areas.

Middle and lower course

Downstream of Barnard Castle the valley widens and the Tees develops meanders. Pebbles and sand move by saltation, and suspension becomes more important as discharge increases. Further downstream, around Yarm and Stockton-on-Tees, the river meanders across a wide floodplain.

In the lower course and the Tees estuary, the load is mainly fine silt and clay carried in suspension, plus the dissolved load. As the river meets the sea, velocity falls and fine sediment is deposited, forming mudflats in the estuary. This sequence from boulders to silt is exactly the pattern predicted by theory.

River transportation: frequently asked questions

What are the 4 types of river transportation?

The four types are traction (rolling boulders), saltation (bouncing pebbles), suspension (fine particles carried in the water) and solution (dissolved minerals).

Which transport process needs the most energy?

Traction needs the most energy because it moves the largest and heaviest particles. Solution needs the least, as dissolved minerals are part of the water.

What is the difference between bedload and suspended load?

Bedload is moved along the river bed by traction and saltation. Suspended load is made of fine particles carried within the water and rarely touches the bed.

Why is river water sometimes brown?

Brown water usually shows a large suspended load of silt and clay, often after heavy rain has washed soil into the channel. In peat moorland areas, dissolved organic matter can also stain the water.

Where does most river transportation happen?

The total load is usually greatest in the lower course, where discharge is highest. The largest particles move in the upper course, but mainly during floods.

What happens when a river stops carrying its load?

When a river loses energy it deposits its load, starting with the largest particles. This forms features such as slip-off slopes, levees, floodplains and deltas.

River transportation: key takeaways

  • River transportation is the movement of a river’s load downstream.
  • The four processes are traction, saltation, suspension and solution.
  • Bedload moves by traction and saltation; fine material moves in suspension; minerals move in solution.
  • Velocity, discharge, gradient, channel shape and geology all affect how much load is carried.
  • Competence is the largest particle a river can carry; capacity is the total load.
  • Load becomes smaller and more rounded downstream as attrition takes place.
  • The River Tees shows a clear change from boulders in Upper Teesdale to silt in the estuary.

To conclude

River transportation links erosion and deposition, moving material from the uplands to the sea. Students who can name the four processes, match each to a particle size and explain how the load changes downstream will be well prepared for exam questions on this part of Topic 1.

Dr Hayley Stainton

About the author

Dr Hayley Stainton is an educator, examiner and the founder of The Geography Teacher. She has a PhD and more than 20 years’ experience teaching at school and university level. Read more about Hayley